Kia Sportage: Charging System
READ NEXT:
Description
The charging system includes a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has built-in diodes, each rectifying AC
Components and Components Location
Components
Pulley
Front bracket
Front bearing
Rotor
Rear bearing
Rear bracket
Though bolt
Regulator
assembly
Regulator bolt
Rear cov
SEE MORE:
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3. Remove the BCM (A) after removing the nuts, connectors and antenna cable.
Installation
1. Install the BCM after connecting the connectors and cab
1. Commercial spot welding machines do not perform
as well as the machines used in the manufacturing
process. When spot welding, increase the number
of spot welds by 30% (1.3 times the original number
of welds).
2. When spot welding, weld in the middle of the joint.
Spot welding on the
Description and Operation | Repair procedures
