With a smart key, you can lock or unlock a door and even start the engine without inserting the key.
Type A
Type B
Lock (1)
All doors are locked if the lock button is pressed. If all doors are closed, the hazard warning lights will blink and the chime will sound once to indicate that all doors are locked.
Also, if the lock button is pressed once more within 4 seconds, the hazard warning lights will blink and the chime will sound once to confirm that the door is locked.
However, if any door remains open, the hazard warning lights (and/or the chime) will not operate. But if all doors are closed after the lock button is pressed, the hazard warning lights will blink once.
Unlock (2)
The driver's door is unlocked if the unlock button is pressed once. The hazard warning lights will blink twice to indicate that the driver's door is unlocked.
All doors are unlocked if the unlock button is pressed once more within 4 seconds.
The hazard warning lights will blink and the chime will sound twice again to indicate that all doors are unlocked. After pressing this button, the doors will lock automatically unless you open any door within 30 seconds.
If you attempt to lock or unlock the door by pressing the door lock/unlock button in any of the following states, the door will not be locked or unlocked.
If equipped, the driver can turn off or set the 2-press unlock setting function. For more information, refer to "User settings mode"
NOTICE
If the smart key is inoperative due to exposure to water or liquids, it will not be covered by your manufacturer's vehicle warranty.
Liftgate open (3)
The liftgate is opened (if equipped) if the button is pressed for more than 1 second.
Panic alarm (4)
The horn sounds and the hazard warning lights blink for about 30 seconds if this button is pressed for more than 0.5 seconds. To stop the horn and lights, press any button on the transmitter.
Remote start (5) (if equipped)
You can start the vehicle using the remote start button (5) of the smart key.
To start the vehicle remotely:
Press the remote start button once to turn off the vehicle.
If no further action for operating/driving the vehicle is taken, the vehicle will be turned off 10 minutes after starting the vehicle remotely.
While remote starting, the hazard warning lights blink 3 times. If you want to stop the engine, press the Remote Start button (5) again.
Start-up
You can start the vehicle without inserting the key.
* For more information, refer to "ENGINE START/STOP button (if equipped)"