You can set the speed limit when you do not want to drive over a specific speed.
If you drive over the preset speed limit, the warning function operates (set speed limit will blink, and chime will sound) until the vehicle speed returns within the speed limit.
Manual Speed Limit Assist operation
Setting speed limit
The speed limit indicator (
)
light will appear on the cluster.
Push the + switch up or - switch down and hold it. The speed will increase or decrease to the nearest multiple of five (multiple of ten in km/h) at first, and then increase or decrease by 5 mph (10 km/h).
The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.
NOTICE
When the accelerator pedal is not depressed beyond the pressure point, vehicle speed will maintain within the speed limit.
Temporarily pausing Manual Speed Limit Assist
Press the ( ) button to
temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
indicator (
) will stay on.
Resuming Manual Speed Limit Assist
To resume Manual Speed Limit Assist
after the function was paused, operate
the +, - switch or ( ) button.
If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster.
If you press the ( ) button,
vehicle
speed will resume to the preset speed.
Turning off Manual Speed Limit Assist
Press the Driving Assist ( )
button to
turn Manual Speed Limit Assist off. The
Speed Limit indicator (
) will go
off.
Always press the Driving Assist ( )
button
to turn Manual Speed Limit Assist off
when not in use.
WARNING
Take the following precautions when using Manual Speed Limit Assist:
Check that the Speed Limit indicator
(
) is off.
It is the responsibility of the driver to always drive safely and should always be aware of unexpected and sudden situations from occurring. Pay attention to the road conditions at all times
NOTICE
The images or colors may be displayed differently depending on the specifications of the instrument cluster or theme.