Kia Sportage: Limitations of Reverse Parking
Collision-Avoidance Assist
Reverse Parking Collision-Avoidance
Assist may not assist braking or warn the
driver even if there are pedestrians or
objects under the following circumstances:
- Any non-factory equipment or accessory
is installed
- Your vehicle is unstable due to an
accident or other causes
- Bumper height or rear ultrasonic sensor
installation has been modified
- Rear view camera or rear ultrasonic
sensor(s) is damaged
- Rear view camera or the rear ultrasonic
sensor(s) is stained with foreign
material, such as snow, dirt, etc.
- Rear view camera is obscured by a
light source or by inclement weather,
such as heavy rain, fog, snow, etc.
- The surroundings are very bright or
very dark
- Outside temperature is very high or
very low
- The wind is either strong (above 12
mph (20 km/h)) or blowing perpendicular
to the rear bumper
- Objects generating excessive noise,
such as vehicle horns, loud motorcycle
engines or truck air brakes, are
near your vehicle
- An ultrasonic sensor with similar frequency
is near your vehicle
- The pedestrians are difficult to recognize
under following conditions:
- There is ground height difference
between the vehicle and the pedestrian
- The image of the pedestrian in the
rear view camera is indistinguishable
from the background
- The pedestrian is near the rear
edge of the vehicle
- The pedestrian is not standing
upright
- The pedestrian is either very short
or very tall for Reverse Parking Collision-
Avoidance Assist to detect
- The pedestrian or cyclist is wearing
clothing that easily blends into the
background, making it difficult to
detect
- The pedestrian is wearing clothing
that does not reflect ultrasonic
waves well
- Size, thickness, height, or shape of the
object does not reflect ultrasonic
waves well (e.g., pole, bush, curbs,
carts, edge of a wall, etc.)
- The pedestrian or the object is moving
- The pedestrian or the object is very
close to the rear of the vehicle
- A wall is behind the pedestrian or the
object
- The object is not located at the rear
center of your vehicle
- The object is not parallel to the rear
bumper
- The road is slippery or inclined
- The driver backs up the vehicle immediately
after shifting to R (Reverse)
- The driver accelerates or circles the
vehicle
Reverse Parking Collision-Avoidance
Assist may unnecessarily warn the driver
or assist with braking even if there are
no pedestrians or objects under the following
circumstances:
- Any non-factory equipment or accessory
is installed
- Your vehicle is unstable due to an
accident or other causes
- Bumper height or rear ultrasonic sensor
installation has been modified
- Your vehicle height is low or high due
to heavy loads, abnormal tire pressure,
etc.
- Rear view camera or the rear ultrasonic
sensor(s) is stained with foreign
material, such as snow, dirt, etc.
- The pattern on the road is mistaken
for a pedestrian
- There is shadow or light reflecting on
the ground
- Pedestrians or objects are around the
path of the vehicle
- Objects generating excessive noise,
such as vehicle horns, loud motorcycle
engines or truck air brakes, are
near your vehicle
- Your vehicle is backing towards a narrow
passage or parking space
- Your vehicle is backing towards an
uneven road surface, such as an
unpaved road, gravel, bump, gradient,
etc.
- A trailer or carrier is installed on the
rear of your vehicle
- An ultrasonic sensor with similar frequency
is near your vehicle
WARNING
- Always pay extreme caution while
driving. The driver is responsible for
controlling the brake for safe driving.
- Always pay attention to road and traffic
conditions while driving, whether
or not there is a warning.
- Always look around your vehicle to
make sure there are no pedestrians or
objects before moving the vehicle.
- The performance of Reverse Parking
Collision-Avoidance Assist may vary
under certain conditions. If vehicle
speed is above 2 mph (4 km/h),
Reverse Parking Collision-Avoidance
Assist will provide collision avoidance
assist only when pedestrians are
detected. Always look around and pay
attention when Reversing your vehicle.
- Some objects may not be detected by
the rear ultrasonic sensors due to the
objects distance, size or material, all of which can limit the effectiveness
of
the sensor.
- Reverse Parking Collision-Avoidance
Assist may not operate properly or
may operate unnecessarily depending
on the road conditions and the surroundings.
- Do not solely rely on Reverse Parking
Collision-Avoidance Assist. Doing so
may lead to vehicle damage or injuries.
- Always keep the rear view camera
and rear ultrasonic sensors clean.
- Do not use any cleanser containing
acid or alkaline detergents when
cleaning the rear view camera lens.
Use only a mild soap or neutral detergent,
and rinse thoroughly with water.
- Do not spray the rear view camera or
the rear ultrasonic sensors or their
surrounding area directly with a high
pressure washer. It may cause the
rear view camera or the rear ultrasonic
sensors to malfunction.
- Do not apply objects, such as a
bumper sticker or a bumper guard,
near the rear view camera or rear
ultrasonic sensors or apply paint to
the bumper. Doing so may adversely
affect the performance of Reverse
Parking Collision-Avoidance Assist.
- Never disassemble or apply impact on
the rear view camera or the rear ultrasonic
sensors components.
- Do not apply unnecessary force on
the rear view camera or the rear ultrasonic
sensors. Reverse Parking Collision-
Avoidance Assist may not
operate properly if the rear view camera
or the rear ultrasonic sensor(s) is
forcibly moved out of proper alignment.
Kia recommends visiting an
authorized Kia dealer.
- Noise may be heard when sudden
braking occurs to avoid a collision.
- If any other warning sound such as
the seat belt warning chime is already
generated, Reverse Parking Collision-
Avoidance Assist warning may not
sound.
- Reverse Parking Collision-Avoidance
Assist may not work properly if the
bumper has been damaged, replaced
or repaired.
- Reverse Parking Collision-Avoidance
Assist may not operate normally if
interfered by strong electromagnetic
waves.
- Playing the vehicle audio system at
high volume may prevent passengers
from hearing Reverse Parking Collision-
Avoidance Assist warning
sounds.
- The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function
NOTICE
Reverse Parking Collision-Avoidance
Assist can detect a pedestrian or an
object when:
- A pedestrian is standing behind the
vehicle
- A large obstacle, such as a vehicle, is
parked in the rear center of your vehicle
READ NEXT:
Your vehicle's fuel economy depends
mainly on your style of driving, where
you drive and when you drive.
Each of these factors affects how many
kilometers (miles) you can get from a
liter (
The radio frequency components
(Front Radar) complies:
For United States and United States territories
For Canada
The radio frequency components
(Rear Corner Radar) complies:
For Uni
SEE MORE:
Description and Operation
Description
The passenger airbag (PAB) is installed inside the crash pad and protects the
front passenger in the event of a frontal
crash. The SRS CM determines if and when to deploy the PAB.
CAUTION
Never attempt to measure the circuit resistance of the air ba
Components and
Components Location
Components
TPMS Receiver Circuit Diagram
Harness Connector
Battery
CAN_High
GND
-
-
-
IGN
CAN_Low
-
-
-
-
Description and
Operation
Description
1. Mode
Virgin State
The receiver as a sole part is shipped