Kia Sportage: Wiper blades
READ NEXT:
When the wipers no longer clean adequately,
the blades may be worn or
cracked, and require replacement.
To prevent damage to the wiper arms or
other components, do not attempt to
move the wiper
When the wipers no longer clean adequately,
the blades may be worn or
cracked, and require replacement.
CAUTION
To prevent damage to the wiper arms or
other components, do not attempt to
move th
Within 20 seconds after the vehicle
ignition is OFF, move the wiper lever
to MIST position for over 2 seconds
until the wiper moves down to the
bottom middle part.
Raise the wiper arm
SEE MORE:
Replacing front turn signal lamp (Bulb type)
Turn off vehicle and disconnect the
negative terminal from the battery.
Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align
with the slots on the assembly.
Remove the bulb
Repair procedures
Inspection
Driver Power Door Lock Switch
1. Disconnect the negative battery terminal.
2. Remove the front door trim.
(Refer to the BD group - "Front door")
3. Disconnect the switch connector (16 pins) from wiring harness.
4. Check for continuity between
Blade inspection
