Kia Sportage: Warning and indicator lights
Kia Sportage - Fifth generation (NQ5) - (2022-2026) - Owner's Manual / Features of your vehicle / Warning and indicator lights
READ NEXT:
Warning lights
The warning light and indicator light
indicate a situation where the driver
should be careful and whether the various
functions are activated.
Warning lights
The warning light indicates situatio
Indicator lights
Electronic stability control (ESC)
indicator light
This indicator light appears:
Once you set the ignition switch or
ENGINE START/STOP Button to the
ON position.
It appears for approx
SEE MORE:
Rail Pressure Sensor (RPS)
Description and Operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the
instantaneous fuel pressure in the delivery pipe. The sensing element
(Semiconductor element) built in the sensor converts the pressure to voltage
signal. By using this si
Repair procedures
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.
(Refer to the BD group - "Crash pad")
3. Remove the BCM (A) after removing the nuts, connectors and antenna cable.
Installation
1. Install the BCM after connecting the connectors and cab
Content
- Home
- Kia Sportage - Fifth generation (NQ5) - (2022-2026) - Owner's Manual
- Kia Sportage - Second generation (JEKM) (2005-2015) - Body Workshop Manual
- Kia Sportage Third generation (SL) - (2011-2016) - Service and Repair Manual
- Sitemap
- Top articles
